Burner Ignition Controller


The burner ignition control card is designed to ensure the complete combustion of fuel by mixing it with air at an optimum rate under control. The fuel in gas burners is controlled with the help of fuel solenoid valves and regulators. The high voltage transformer that creates the spark required for the first ignition also operates with electric energy. The fuel that comes from the fuel line to the ignition head is homogeneously mixed with the air blown to the combustion head with the help of the fan in the burner main body and is ignited through a special turbulence system. The burner ignition control card ensures the safe and efficient combustion of the burner with the appropriate duration and steps of Pre-Purge, ignition time, flame control, fuel amount, and On/Off, gradual, or proportional safe burning of the burner. The fuel and air mixtures are precisely adjusted by entering the parameters from the computer interface to obtain an efficient mixture and achieve safe and efficient combustion. We also offer instant updating, development, and customization options according to your needs with our expert team and experiences in this field.

Related Products

Fields of Application

  • Mechanical Proportional Valve Burners
  • Electronic Proportional Valve Burners
  • On/Off Burners
  • Premix Burners
  • LPG / LNG burning systems


Main Features

  • Pre and post-purge function
  • Ignition time and number function
  • Flame and extinction detection
  • Gradual or proportional valve control
  • Premix burner control
  • On/Off control
  • Alarm and status outputs
  • Customizable extra inputs and outputs
  • Control function with computer interface


Teknik Özellikler

Supply Voltage 230V~ 50Hz
Power Consumption ≤ 4W
Fuse 5A Delay
Flame Detection
Storage Temperature -20°C … +80°C
Operating Temperature -10°C … +60°C
Timing Pre-Purge: 0-60 sec

Post-Purge: 0-60 sec

APS Test: 0-60 sec

Flame Detection: 0-5 sec

Extinction Detection: 0-5 sec

Ignition Time: 1-9 sec

Connections Peripheral Connections: Molex MINIFIT

Ignition: 2.8×0.5mm FASTON Terminal

Ground: 6.2×0.8mm FASTON Termina

Electrical Values Gas Valve: 230V~ / 5A (Relay Contact)

Proportional Valve: 24V

Fan: 230V~ / 5A (Relay Contact) (Premix Fan Control) Alarm: 230V~ / 5A (Relay Contact)

Accessories Computer Interface


Standards and Regulations


EN 61000-3-2,

EN 61000-4-5

EN 61000-6

EN 61000-11

Create Request

    Bağlantı Şeması Talep Et / Request Diagram

    Ürünlerimize ait bağlantı şemalarını talep etmek için lütfen formu doldurunuz. <strong>Please fill out the form to request connection diagrams of our products.</strong>