LNG LPG Ignition Module
2000-V1.00
It is used for the ignition of modulation-free natural gas combustion systems. It is suitable for systems that do not require gradual combustion because there is no proportional valve output or fan control. It can also be used as a low-cost heater control card. On/Off control is provided with button connection. It controls the flame detection and ignition functions. Since ignition and flame detection are provided by a single electrode, it provides cost and assembly advantages. It can work completely compatible with different types of valve groups. It offers the possibility of controlling multiple heaters simultaneously by communicating with multiple heaters with the central natural gas heater card. The additional ignition control card can be controlled over the heater card to which it is connected via UART protocol communication. With our expert team and experience in this field, we also offer instant update, development and customization options according to your needs.
Related Products
Fields of Application
- Ceramic Radiant Heaters (On/Off Type)
- Modulation-Free Burners
- Natural Gas Combustion Chambers
- Independent Ignition Systems
Main Features
- Flame detection sensor
- Ignition function
- Gas valve control
- On/Off control
- Customizable extra inputs and outputs
- Control of multiple heaters
- Control with computer interface
Standards and Regulations
Supply Voltage | 230V~ 50Hz |
Power Consumption | ≤ 4W |
Fuse | 5A Delay |
Flame Detection | Ionization, 0.6uA min. |
Storage Temperature | -20°C … +80°C |
Operating Temperature | -10°C … +60°C |
Timing | Flame Detection: 0-5 sec
Flameout Detection: 0-5 sec Ignition Time: 1-9 sec |
Connections | Environmental Connections: Molex MINIFIT
Ignition: 2.8×0.5mm FASTON Terminal Ground: 6.2×0.8mm FASTON Terminal |
Electrical Values | Gas Valve: 230V~ / 5A (Relay Contact) |
Equipment | Computer Interface |
Standards and Regulations
EN 55011,
EN 61000-3-2,
EN 61000-4-2/4/5/6/8/9/11